MPP

One of the most important parts in PV system architecture is the power converters. The reason is that they play an important role in transforming the different types of electricity, to make the electricity convenient to the end users. Since the solar cell produces a DC type of electricity, there’s room for various types of power converters. Here, some of the most commonly used power converter types are briefly describe according to their topology, function, efficiency, and the major global manufacturers.

1. Power optimizer: Commonly known as a DC-DC power optimizer in solar PV markets, a power optimizer is a module-level power converter. It takes DC input from the solar module and gives either higher or lower DC output voltage. Such a converter is equipped with an MPPT technology to optimize the power conversion from the solar panel to the DC load or a battery or central inverter. It is also considered one of the most efficient power converters, delivering up to 99.5% efficiency. However, it needs DC cabling from the array. Some of the major players in this power converter market are SolarEdge and Tigo Energy.

2. Module inverter/micro-inverter: This is also a module-level power converter. It takes DC input from the solar module and converts it into AC electricity, which is then ready to be connected to the load or single-phase main grid or to a central inverter. It is also equipped with MPPT technology to detect the maximum power point of each module. Even though it doesn’t requires any DC cabling, it is more expensive than the power optimizer due to its advanced design. The efficiency of such a power converter is about 96%. The important players in this power converter market are Enecsys and Enphase.

3. String inverter: As an extension of a module-level power converter is the string inverter, which is suitable for a string or parallel strings of modules connected in series. Such a power converter is used for small PV systems up to 10 kW in capacity and are usually connected to the main grid. The output of such a power converter is 3 phase lines which are ready to be connected to a low voltage main grid. Even though it is incorporated with MPPT technology, due to the connection of a large PV array, it has a global maximum power point (MPP) which then degrades the efficiency of the PV system. In order to improve the efficiency, it would be wise to use a module inverter first and then the string inverter. However such configurations are more expensive. Apparently, one of the cons in such power converters is that the PV system is highly affected by shadowing on PV modules, thereby pulling down the system efficiency as low as possible. Meanwhile, many researchers are investigating a new MPPT algorithm to get the most efficient global MPP to overcome the shadowing affect. Players include SMA, Power One, Fronius, and Delta Energy Systems.

4. Central inverter: In large PV power plants (10 kW and higher), central inverters are used instead of string inverters. However, the central inverters’ functionality remains the same (i.e, to produce a 3-phase high voltage output for grid integration), which is why this power converter is considered essential for connecting with the main grid. In many large PV power plants, central inverters are inevitable. But there are many losses within the PV system due to their large and complex configuration. However, to mitigate such losses, some of the manufacturers, like Siemens, have developed a master-slave arrangement, such that at low irradiance the system efficiency will increase. 

This report from Solarpraxis AG allows a deeper dive into these solar PV technologies. In my next article, I’ll provide a comparative analysis of power optimizers and module inverters, focusing in more depth their pros and cons.

Image Credit: Delta Products Corporation

Types Of Power Converters In A PV System was originally published on Solar Love!.